Telehandler 3T or Less

Course Outline

COURSE DETAILS

 

Telehandler (Less than 3T)

(1 day course)


Unit Codes:

RIIHAN309E - Conduct Telescopic Materials Handler Operations (3T or less)

WHO should complete Telehandler (Less than 3T) training?

Anyone who operates a telescopic materials handler(Less than 3 Tonnes capacity), in a workplace.

WHY do you need Telehandler (Less than 3T) training?

The Law:
Section 21 of the OH&S Act 2004 (Vic.) requires that employers provide an adequate level of information, instruction, training and supervision to employees to enable them to work safely.

Furthermore, Worksafe via a guidance note issued in June 2010 stated the following:

“Telehandler operators with a capacity of three tonne or less do not require a licence, but should be competent in their use and have training in relation to the machine and attachment being used.”

WHAT is covered in Telehandler (Less than 3T) training?

This course provides trainees with information, instruction and training about safe operation of a Telehandler.   Telehandler practical training and assessments are conducted in our purpose built training facility.

  • This will help you or your employees to understand what is required to:
  • Plan and prepare telescopic materials handler operations
  • Conduct machine pre-operational checks
  • Operate telescopic materials handler
  • Attach, secure, lift, carry and place materials
  • Select, remove and fit attachments
  • Relocate the telescopic materials handler
  • Carry out machine operator maintenance & Clean up

WHERE are the Telehandler (Less than 3T) training courses conducted?

How Safe is Your Workplace?

If safety is important to you and your staff are operating any elevating work platforms, you must always ask yourself the question "How safe is your Workplace?"

How Safe is Your Workplace?

COURSE OUTLINE

Cost?

  • $400.00 (GST Exempt) per person
Book 2-3 courses to receive a 7.5% discount off all courses booked
or
Book 4 or more courses to receive a 15% discount off all courses booked.

WHEN are the Telehandler (Less than 3T) courses conducted?

Dates:

  • Friday 21st July 2017.
  • Tuesday 22nd August 2017.

Duration & course times:

1 day course (07:45am - 16:00pm Approx.)

Course numbers:

  • Maximum 6

Clothing:

  • Enclosed shoes and hi-visibility clothing are required
  • WAM Training can provide a hi-visibility safety vest for courses on our site

Assessment:

Trainees will be assessed using a short-answer written test, incorporating a Job Safety Analysis, and a practical assessment involving the use of a telescopic materials handler.

Outcome:

Once competence is achieved, trainees will receive a Statement of Attainment and Proof of Training Card.

Language, Literacy & Numeracy:

Trainees need to be able to demonstrate the knowledge and skills required and numeracy to work by themselves and as part of a team, exercising judgement in the selection of equipment, services or contingency plans. Trainees must be able to utilise workplace documentation without the guidance of another person.

Health note:

The training and assessment will involve working with heavy machinery, bending, crawling, and light to medium lifting. Please refer to ‘Student Health Form’ for further advice.

Book This Course

Course Enquiry

Course Photos

telehandler-3t01.jpg
telehandler-3t01.jpg
telehandler-3t01.jpg
telehandler-3t01.jpg
telehandler-3t01.jpg
telehandler-3t01.jpg
telehandler-3t01.jpg
telehandler-3t01.jpg
telehandler-3t01.jpg

Course Reviews

COURSE REVIEWS

6.2.17 - Jeremy H
Stan was great, instead to call staff talked. About any questions any one had.
18.1.17 - Shane H
Very good course, trainer added to my knowledge.
13.1.17 - Garry H
Dave had an excellent approach to the training in a way were it was easily taken on board.
16.12.16 - Dion G
Stan was great had great knowledge and communicated clearly making it easy to take in information.
15.09.16 - Anonymous
Top trainer on a rainy day/ 100% recommend.
12.08.16 - Chris W
Great trainer.
12.08.16 -  Tony M
Good informal environment. Easy to ask any questions and learn.
15.07.16 - Ali S
The course at WAM are the best that I have come across from any RTO so far.
07.03.16 - Richard S
Good course, great trainer.
14.08.15 - Anonymous 
Excellent course and instructions
13.07.15 - Bruce U
Great service, facility and price.
13.17.15 - Peter T
Your course was very good. I will be using you again and will recommend others to you - Good values and good outcome.
12.03.15 - Anonymous
Thanks for everything.

12.03.15 - Philip M
THANK YOU.

12.03.15 - Anonymous
Trainer was clear and patient.

05.03.15 - Anonymous
Great course, great to get practical experience.

05.03.15 - Anonymous
Great trainer

23.02.15 - 25.02.15 - Anonymous
Everything was perfect.

2.6.14 - Andrew W
Great course content, Aaron was very clear and accommodating to my knowledge.
24.2.14 - Rory S
Good coffee & close café. The trainer was pretty good too.