Boom & Scissor lift training Melbourne
Don’t Risk It: Make Sure Your Boom Lift Training and Scissor Lift Training is Complete
Don't take the risk when you work in a job where you operate boom or scissor lifts. Get the boom and scissor lift training you need in Melbourne before you even sit down at the controls. Even if you consider yourself to be highly experienced, according to the Occupational Health and Safety Act, you are required to be licensed in operation. Taking a course is not only required by law, it is also just a great idea to get a refresher on safety and operation of the lifts. Most workplace accidents, including deaths from workplace accidents can be attributed to being less than careful when it comes to safety. Constant vigilance is always required when operating heavy machinery such as this which is only one thing that you will learn when you take scissor and boom lift training in Melbourne.
On top of being a safe choice and mandatory in Australia, if you do not get the training you need to operate boom and scissor lifts, you can be fined and even be forced to serve jail time, especially if there is an accident when you are operating the lift. There is really no excuse for not getting this type of training when it is so easy to obtain. Contacting a company that offers this type of training is essential. You will be given the training you need and will be able to get your license quickly and easily ensuring that you have taken the steps to remain safe on the work site.
There are two different types of training that are available for operating scissor and boom lifts. The first is a WorkSafe High Risk Work Licence which not everyone will need. This type of license is required if you work with an 11 metre or higher lift and is specific to boom lifts. The other type of license that is available is the EWPAA Yellow Card. This card, which is the license you need in most situations, will allow you to remain unrestricted when using scissor lifts in Australia and will also allow you to legally operate boom lifts in Australia as long as they are under 11 metres. Every state in Australia has certain requirements but all of them require the use of a Yellow Card when operating these lifts.
It is the duty of the employer to provide this training for their employees, so if you are not trained and asked to operate a boom or scissor lift, you should not do it until you are licensed. It is also required that employers and employees comply with the laws of the Occupational Health and Safety Act and must show the cards of those operating lifts if asked. The card will be used to confirm that the operator is adequately trained and will also show the type of training that the operator went through.
Setting up training is easy. Many facilities that offer training will even hold classes on site. Generally all it takes is a phone call to set it up and when using a highly respected training centre, you will be sure that you are getting the best scissor and boom lift training in Melbourne.